میهمان گرامی خوش آمدید، نمایش این متن بدان معنی است که شما هنوز ثبت نام نکرده اید، لطفا" برای ثبت نام اینجا را کلیک کنید و در چند مرحله ساده ثبت نام خود را تکمیل نمائید، البته پس از ثبت نام شما می توانید از تمامی امکانات سایت بهره ببرید.
css3menu.com Glass and LCD cchange

css menu by Css3Menu.com






صفحه 7 از 7 نخستنخست ... 34567
نمایش نتایج: از 91 به 104 از 104
  1. #91
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.0

    Medusa Box v.2.4.0 is out!

    We have added boot repair via USB and small TP for:
    LG D320, D320F, D320N, D380, D385, MS323,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for:
    LG C410, ZTE Z993, Samsung GT-B6520!

    Medusa Box v.2.4.0 Release Notes:
    - Added support for the following models:

    • LG D320 - added Dead Boot Repair via USB
    • LG D320F - added Dead Boot Repair via USB
    • LG D320N - added Dead Boot Repair via USB
    • LG D380 - added Dead Boot / Device Repair via USB
    • LG D385 - added Dead Boot Repair via USB
    • LG MS323 - added Dead Boot Repair via USB
    • LG C410 - added Dead Boot / Device Repair
    • ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  2. The Following User Says Thank You to Reza.Ahmadi For This Useful Post:


  3. #92
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.1

    Medusa Box v.2.4.1 is out!

    We have added boot repair via USB and small TP for:
    LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for:
    Huawei G510-0010 and Y301-A1 (MetroPCS)!

    Medusa Box v.2.4.1 Release Notes:
    - Added support for the following models:

    • LG D370 - added Dead Boot Repair via USB
    • LG D370TR - added Dead Boot Repair via USB
    • LG D373 - added Dead Boot Repair via USB
    • LG D373EU - added Dead Boot Repair via USB
    • LG D375 - added Dead Boot Repair via USB
    • LG D410 - added Dead Boot / Device Repair
    • LG D410H - added Dead Boot Repair
    • LG D410NH - added Dead Boot Repair
    • Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  4. #93
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض

    Medusa Box v.2.4.2 is out!

    We have added boot repair via USB and small TP for:
    LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Medusa Box v.2.4.2 Release Notes:
    - Added support for the following models:

    • LG D170 - added Dead Boot / Device Repair via USB
    • LG D175F - added Dead Boot Repair via USB
    • LG D180F - added Dead Boot Repair via USB
    • LG D400H - added Dead Boot Repair via USB
    • LG D400HN - added Dead Boot Repair via USB
    • LG D405 - added Dead Boot Repair via USB
    • LG D405H - added Dead Boot Repair via USB
    • LG D405N - added Dead Boot Repair via USB
    • LG D405TR - added Dead Boot Repair via USB
    • LG D415 - added Dead Boot Repair via USB
    • LG D724 - added Dead Boot / Device Repair via USB


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  5. #94
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض

    Medusa Box v.2.4.3 is out!


    We have added boot repair via USB and small TP for:
    LG E980, E980H, LG E985T, E986, LG E988, LG E989,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for:
    Gigabyte GSmart G1317D

    Medusa Box v.2.4.3 Release Notes:

    - Added support for the following models:

    • LG E980 - added Dead Boot / Device Repair via USB
    • LG E980H - added Dead Boot Repair via USB
    • LG E985T - added Dead Boot Repair via USB
    • LG E986 - added Dead Boot Repair via USB
    • LG E988 - added Dead Boot Repair via USB
    • LG E989 - added Dead Boot Repair via USB
    • Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).

    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  6. #95
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.4 is out

    Medusa Box v.2.4.4 is out!

    We have added boot repair via USB and small TP for:
    LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for:
    Samsung SGH-T479B and ZTE V880G.

    Medusa Box v.2.4.4 Release Notes:
    - Added support for the following models:



    • LG D150 - added Dead Boot / Device Repair via USB
    • LG D157F - added Dead Boot Repair via USB
    • LG D160 - added Dead Boot / Device Repair via USB
    • LG D160F - added Dead Boot Repair via USB
    • LG D160G - added Dead Boot Repair via USB
    • Samsung SGH-T479B - added Dead Boot/Device Repair
    • ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:



    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  7. #96
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.5 is out

    Medusa Box v.2.4.5 is out!

    We have added boot repair via USB and small TP for:
    LG D280N, D280G, LG D285, D285F, D285G, D315, D315K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Medusa Box v.2.4.5 Release Notes:

    - Added support for the following models:

    • LG D280N - added Dead Boot Repair via USB
    • LG D280G - added Dead Boot Repair via USB
    • LG D285 - added Dead Boot / Device Repair via USB
    • LG D285F - added Dead Boot Repair via USB
    • LG D285G - added Dead Boot Repair via USB
    • LG D315 - added Dead Boot Repair via USB
    • LG D315K - added Dead Boot / Device Repair via USB


    - Added new Core ID (107180E1) for Qualcomm APQ8064
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  8. #97
    بخش سخت افزار
    تاریخ عضویت
    Dec 2010
    محل سکونت
    زیر سایه مولا علی (ع) قزوین.
    نوشته ها
    14,966
    Thanks
    16,372
    Thanked 29,994 Times in 10,173 Posts

    پیش فرض

    Medusa Box v.2.4.7 - LG F310L, L-04E USB repair and more!


    Medusa Box v.2.4.7 Release Notes:


    - Added support for the following models:

    • LG F310L - added Dead Boot Repair via USB
    • LG L-04E - added Dead Boot Repair via USB
    • Samsung GT-I9210T - added Dead Boot/Device Repair
    • HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)

    - Improved connect procedure for Dead Boot Repair via USB for the following devices:

    • LG P710
    • LG P712
    • LG P713, P713GO, P713TR
    • LG P714
    • LG P715
    • LG P716

    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    More info and discussion are HERE
    __________________________
    WBR,
    Medusa Box Team

  9. The Following User Says Thank You to بهمن آبسته For This Useful Post:


  10. #98
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.8 is out

    Medusa Box v.2.4.8 is out!

    We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
    and via JTAG for Samsung GT-B5512 and LG F200L.


    Medusa Box v.2.4.8 Release Notes:
    - Added support for the following models:

    • LG E960 - added Dead Boot / Device Repair via USB
    • LG F200K - added Dead Boot Repair via USB
    • LG F200L - added Dead Boot Repair via USB / JTAG
    • LG F200LS - added Dead Boot Repair via USB
    • LG F200S - added Dead Boot Repair via USB
    • Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the three next steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  11. #99
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.4.9 is out!

    Medusa Box v.2.4.9 is out!

    We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
    and via JTAG for ViewSonic ViewPad 7 (VS13761).

    Medusa Box v.2.4.9 Release Notes:
    - Added support for the following models:



    • LG D851 - added Dead Boot / Device Repair via USB
    • LG D620 - added Dead Boot Repair via USB
    • LG D620K - added Dead Boot Repair via USB
    • LG D620R - added Dead Boot Repair via USB
    • ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)


    - Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the three next steps:



    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


  12. #100
    اعضا
    تاریخ عضویت
    Nov 2008
    محل سکونت
    کاوش تیم / OROD
    نوشته ها
    387
    Thanks
    250
    Thanked 2,989 Times in 347 Posts

    پیش فرض Medusa Box v.2.5.0 - added LG G3 series USB repair!

    Medusa Box v.2.5.0 is out!

    We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

    Medusa Box v.2.5.0 Release Notes:

    - Added support for the following models:



    • LG D852 - added Dead Boot Repair via USB (Beta)
    • LG D852G - added Dead Boot Repair via USB (Beta)
    • LG D855 - added Dead Boot Repair via USB (Beta)
    • LG D855K - added Dead Boot Repair via USB (Beta)
    • LG D855P - added Dead Boot Repair via USB (Beta)


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the three next steps:



    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)



    Medusa - Ultimate Breakthrough in the Phone Repair!


    Download Medusa Box v.2.5.0

  13. The Following User Says Thank You to Reza.Ahmadi For This Useful Post:


  14. #101
    کارشناس پشتیبانی کاوش تیم
    تاریخ عضویت
    Aug 2010
    محل سکونت
    کاوش تیم
    نوشته ها
    316
    Thanks
    312
    Thanked 712 Times in 209 Posts

    پیش فرض Medusa Box v.2.5.2

    LG F160LV - added Dead Boot / Device Repair via JTAG
    LG F160K - added Dead Boot Repair via JTAG
    LG F160S - added Dead Boot Repair via JTAG
    LG F370K - added Dead Boot Repair via USB
    LG F370L - added Dead Boot Repair via USB
    LG F370S - added Dead Boot Repair via USB


    https://www.boot-loader.com/files/medusa-box.com/softs/Medusa_2.5.2_lite.exe



  15. #102
    کاربر فعال
    تاریخ عضویت
    Apr 2010
    نوشته ها
    273
    Thanks
    585
    Thanked 296 Times in 107 Posts

    پیش فرض

    Medusa Box v.2.5.5 is out!

    We have added Boot Repair via USB and small TP for LG P930, LG LU6200
    and via JTAG for HTC One M7 (PN0720000) and Huawei Y300-0000!

    Medusa Box v.2.5.5 Release Notes:
    - Added support for the following models:

    • LG P930 - added Dead Boot Repair via USB
    • LG LU6200 - added Dead Boot Repair via USB
    • Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
    • HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG


    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair LG P930 and LG LU6200 via USB, please follow the three next steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)http://medusabox.com/eng/download/software


  16. #103
    کارشناس پشتیبانی کاوش تیم
    تاریخ عضویت
    Aug 2010
    محل سکونت
    کاوش تیم
    نوشته ها
    316
    Thanks
    312
    Thanked 712 Times in 209 Posts

    پیش فرض Medusa Box v.2.5.7


    :Added support for the following models


    LG E970 - added Dead Boot Repair via USB
    LG H220 - added Dead Boot Repair via USB
    Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
    (HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di
    (All pinouts and Repair procedures are described in the manual ("Help" button in Software


    http://medusabox.com/eng/download/software




  17. The Following 2 Users Say Thank You to کاوش 105 For This Useful Post:


  18. #104
    کارشناس پشتیبانی کاوش تیم
    تاریخ عضویت
    Aug 2010
    محل سکونت
    کاوش تیم
    نوشته ها
    316
    Thanks
    312
    Thanked 712 Times in 209 Posts

    پیش فرض Medusa Box v.2.6.0


    :Added support for the following models

    LG D486 - added Dead Boot/Device Repair via USB
    LG H786 - added Dead Boot/Device Repair via USB
    (LG E410 - added Dead Boot Repair via USB (in Test Mode
    (Nokia X (RM-980) - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di
    (Added new Core ID for Samsung GT-I8262 (ID: 007730E1) (thanks to Mr. jewell majj
    (All pinouts and Repair procedures described in the manual ("Help" button in the Software



 

 
صفحه 7 از 7 نخستنخست ... 34567

کلمات کلیدی این موضوع

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •